I am looking for motor mounts not the ones that bolt to the block
but the ones that go from the frame to the rubber motor mount!
I need to know if any v8 ones will work or are they different for a
Windsor( small block) ? I am swaping a straight 6 out and putting a 351 w
in! It would be great if I could see a pic of the frame for a 150 w a small block
In it. Thanks
Please help
Moderator: InfoFord
3 posts • Page 1 of 1
Please help
by bls77ford » Wed May 12, 2010 6:29 pm
- bls77ford
- Posts: 10
- Joined: Sun May 02, 2010 9:08 am
Re: Please help
by 79fordboy » Thu May 13, 2010 11:00 am
try nationalpartsdepot.com and look at the online catalog for the trucks to compair item numbers. i have ordered a few things from there and had great luck
76 F350 Camper Special, Super Cab, Ranger, XLT, 460, A/T, 2wd(new weekend driver)
79 F250 Ranger, Super Cab, 400, A/T, 4wd(Toy)
78 F100 Ranger, Reg Cab, 351, A/T, 2wd(Show)
79 F100 Custom, Reg Cab, 302, A/T, 2wd(Daily Driver, sold and dearly missed)
79 F250 Ranger, Super Cab, 400, A/T, 4wd(Toy)
78 F100 Ranger, Reg Cab, 351, A/T, 2wd(Show)
79 F100 Custom, Reg Cab, 302, A/T, 2wd(Daily Driver, sold and dearly missed)
- 79fordboy
- Posts: 85
- Joined: Wed May 28, 2008 5:50 am
- Location: Lancaster Ohio
Re: Please help
by InfoFord » Thu May 13, 2010 8:56 pm
2wd or 4x4
typically the 351M/400 frame perches will work for you in your swap yu do need the insulators from a 83-96 f series to set down on the perches
typically the 351M/400 frame perches will work for you in your swap yu do need the insulators from a 83-96 f series to set down on the perches
-
InfoFord - Posts: 55
- Joined: Thu Dec 14, 2006 8:42 pm
- Location: Great Falls MT
3 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 0 guests